Differential Cover Gasket – Chrysler, Dodge, Plymouth 7 1/4″ and 8 3/4″ – 10 bolt

$21.50

SKU:RG-6583

Differential Cover Gasket – Silicone

for 

Chrysler Products – Mopar Engines

  • Chrysler – Dodge – Plymouth  7 1/4″ and 8-3/4″ Cover

 

   –   Our silicone rubber gaskets are made from aerospace mechanical

          grade AMS silicone and designed to withstand temperatures

          up to 400 degrees Fahrenheit.  

      Therefore, they will not break down and deform or crack up

          like cork or neoprene.

   –   Our silicone gaskets seal uneven and warped surfaces,

          and eliminate corrosion 

   –  Gaskets are 100% reusable.

 

Fits Models:    Chrysler – Dodge – Plymouth  7 1/4″ and 8 3/4″.

For:                1957 – 1977 Dodge Trucks & Cars

 

Part #:             RG-6583

Corresponding part #: FelPro RDS6583;  MRIC-1

One gasket – 1/8″ thick silicone10 bolt holes

Reusable.

 

INSTALLATION INSTRUCTIONS:

  • Wash the cover and mounting surfaces with solvent.    
  • Remove all traces of oil.
  • The gasket must be installed DRY –  No oil or lube of any type.
  • TORQUE TO 20-25 INCH POUNDS.  
  •  DO NOT OVER TIGHTEN!*

 *If the gasket starts to bulge or “pooch” out when tightening 

   – then you are over tightening the gasket.  Back off on the torque.

  Therefore, you must follow the recommended torque listed

  on the package.   In this case, tighter is not better.   

 

TO RE-USE GASKET:   

  • Wash gasket in hot soapy water.
  • Rinse gasket thoroughly, dry completely.
  • Re-install using the above installation instructions.

 

Don’t worry, instructions come with the gasket.

 

Proudly made in the USA.

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194