Valve Cover Gasket – Pratt & Whitney R-2800-CB Series

$4.25

SKU:RG-139203

Valve Cover Gasket – Silicone

for

Pratt & Whitney R-2800-CB Series

 

   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures

     up to 400 degrees Fahrenheit.   

   Therefore, they will not break down and deform or crack up

     like cork or neoprene.   

   Our gaskets seal uneven and warped surfaces and 

     eliminate corrosion.

   Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Fits:             Pratt & Whitney R-2800-CB Series

Part #:      RG-139203     

                        FAA-PMA approved

1 each

Silicone gasket is 1/16″ thick 

Reusable

 

These gaskets are available in a set of 36 under part # RG-139203-36

 

INSTALLATION INSTRUCTIONS:

  1.    Wash the cover and cylinder head surfaces with solvent.   
  2.    Remove all traces of oil.
  3.    Silicone gaskets are installed DRY (No oil or lube used of any type).
  4.    Install gasket DRY.       
  5.    Valve covers and gasket surfaces must be clean and dry.  
  6.    TORQUE: 10 TO 14 INCH POUNDS.      

 

CAUTION – DO NOT OVER-TIGHTEN!

When tightening – if the gaskets start to bulge or “pooch” out

then you are over tightening.    Back off on the torque.

 

TO REUSE GASKET

  1.    Wash gasket briefly in hot soapy water.
  2.    Rinse thoroughly and dry all surfaces.
  3.     Re-install using the above installation instructions.

 

PROUDLY MADE IN THE USA.

 

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194