Valve Cover Gasket (BLACK) – BMW Motorcycle “R” Series (includes R100) – Boxer Twins

$29.00

SKU:RG-11121338426B

 

VALVE COVER GASKET  –  Black SILICONE

fits

BMW MOTORCYCLES 

–  R SERIES (includes R100)

 Boxer Twins

 

   Our silicone rubber gaskets are made from aerospace mechanical

      grade AMS  silicone and designed to withstand temperatures

      up to  400 degrees Fahrenheit.   

    Therefore, they will not break down and deform or crack up

       like cork or neoprene.   

    Our gaskets seal uneven and warped surfaces

       and eliminate corrosion.

    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Fits:     BMW “R” Series Motorcycles

             –  (Except R69, R69S)

 

  • 1960 – 1996      R45, R50/2, R50/5;  R60/2, R60/5, R60/6, R60/7;

                                                   R65, R65LS;  R75/5, R75/6, R75/7;

                                                   R80/7, R80G/S, R80RT, R80R, R80ST; R90S, R90/6

  • 1976 – 1996      R100RS, R100S, R100/7, R100T, R100RT,

                                                   R100CS, R100GS       

   

Part # :      RG-11121338426B  

 

OEM part #:  11-12-1-338-426-BOE, 11-12-1-338-426-BOE, 11121338426

Set of two (2) black silicone gaskets 

Silicone gasket is 1/16″  thick.

Reusable gaskets

 

Installation Instructions:

Wash the cover and cylinder with solvent.   

Remove all traces of oil.

The surfaces must be DRY (NO oil or lube of any type).

Install gasket dry.  

Torque Specifications:

at both ends – torque 15  inch pounds

Center bolt   – torque 15 – 18 inch pounds

 

DO NOT OVER TIGHTEN!   

 

Over tightening makes the gasket squeeze out.

If the gasket bulges or “pooches” out, then back off on the torque a bit.

IF you are concerned about vibration then use Loctite on the bolts.

 

To Reuse Gasket:

Wash the gasket in hot soapy water.

Rinse well and dry all surfaces thoroughly.

Re-install using the above installation instructions.

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

These gaskets also are made in the original orange silicone.

See part # RG-11121338426

 

Proudly made in the USA.

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194