Valve Cover Gasket – Suzuki GS 850

$25.00

SKU:RG-11173-45011

Valve Cover Gasket – Silicone

fits

Suzuki GS 850

Fits Models: 1982-1983: G, GL

 

  –   Our silicone rubber gaskets are made from aerospace mechanical

       grade AMS silicone and designed to withstand temperatures

       up to 400 degrees Fahrenheit.   

      Therefore, they will not break down and deform or crack up

        like cork or neoprene.   

      Our gaskets seal uneven and warped surfaces,

        and eliminate corrosion.

      Gaskets are 100% reusable.

 

Part #:      RG- 11173-45011

OEM #11173-45010,11173-45011,11173-45011-H17

1 each

19 Bolt Holes in Silicone Gasket – 3/32″ thick

Reusable

 

 

INSTALLATION INSTRUCTIONS:

  1.    Wash the cover and cylinder with solvent.  
  2.    Remove all traces of oil.
  3.    The surface must be DRY  (NO OIL or lube of any type).
  4.    Install gasket DRY.
  5.    Torque to 15 inch pounds

 

Do not over tighten – it causes the gasket to bulge or “pooch” out.   

If that does happen then back off on the torque.

It is okay to use Loctite on the bolts.

 

TO RE-USE GASKET:

  1.    Wash gasket in hot soapy water.   
  2.    Rinse and dry  gasket thoroughly.
  3.    Re-install gasket using the above instructions.

 

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194