VALVE COVER GASKETS – “ULTIMATE” SILICONE

fits

– CHEVROLET , BUICK, OLDSMOBILE, GMC and more

   SMALL BLOCK V/8 305, 350 

     (See complete list below)

 

“ULTIMATE” SILICONE  IS FIBERGLASS REINFORCED SILICONE.

 

This may be the last gasket you will ever need to buy!

 

  –    Basically, the gaskets have a layer of fiberglass that is centered

        between 2 layers of silicone which allows the material to

        maintains its original dimensions when subjected to changes in

        temperature and humidity.   

        As a result, it gives the material dimensional stability and

        has a higher tensile strength. 

     

        This is the absolute most stress that a material can resist while

        being pulled or stretched. 

 

  –    Not only is the material resistant to deterioration by weathering

        and engine oil but also withstands temperatures and remains

        flexible over the temperature range of  -100 to 500 degrees

        Fahrenheit. 

 

–     Additionally, the gaskets are made from aerospace mechanical 

       grade silicone and will not break down and deform or crack up

       like cork or neoprene.    

       Consequently, this is one tough gasket. 

 

  –   Finally, this is a reusable gasket.

 

Consequently, this is a very heavy-duty gasket.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits:    Small Block  V/8

CHEVROLET     –   305 & 350 engines (434 models)

                                   1987-2000

 

BUICK                –  7 models:   

                                 Regal 1987,

                                 Roadmaster 1992-1996,

                                 Roadmaster Wagon – 1991

 

HUMMER           –  2 models:     

                                 H1  1995 – 1996

 

OLDSMOBILE   –  3 models:     

                                 Custom Cruiser 1991 – 1992 

 

CADILLAC         –  15 models:     

                                 Escalade 1999 – 2000,

                                 Fleetwood 1993 – 1996,

                                 Fleetwood Brougham 1990 – 1996

 

GMC                   –   361 models:   

                                 Cars and trucks   1994 – 2000

 

ISUZU                 –    8 models:   

                                 NPR  1993 – 2000

 

PONTIAC        –    39 models:   

                                 Firebird  1987 – 1997,

                                 Grand Prix 1987, 

                                 Trans Am  1987 – 1992

 

Part #:      RG-50088FR

Corresponding part #:  VS50088 R

Set of 2  “ULTIMATE” silicone gaskets. 

Gaskets have no bolt holes and are  1/8″ thick.

Reusable.

 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Similarly, this set is also available in regular silicone. 

See part # RG-50088

 

 

INSTALLATION INSTRUCTIONS:    

1. Wash the cover and cylinder head surfaces with solvent.
2. Remove all traces of oil.
3. The gasket must be installed DRY   – (NO OIL OR LUBE OF ANY TYPE).

        TORQUE TO 45-50 INCH POUNDS  

          Do not over tighten!   It causes the gasket to bulge out or squeeze out.

          If that happens, then back off on the torque.

          This gasket set is also available in plain silicone under part # RG-50088.

 

TO REUSE GASKET:  

1. Wash gasket BRIEFLY in hot water and soap.  
2. Rinse well and dry all surfaces thoroughly, 
3. Re-install using the above installation instructions.

 

DO NOT SOAK IN SOLVENT OR GASOLINE.

 

Proudly made in the USA.