Valve Cover Gaskets – FORD and SAAB V4 – “ULTIMATE” Silicone

VALVE COVER GASKETS – Silicone

             for

FORD and SAAB V4

This may be the last gasket you will ever need to buy!

–     There is a layer of fiberglass centered between 2 layers of silicone that

        gives the material dimensional stability and higher tensile strength.

–     Therefore, this material is resistant to deterioration by weathering

        or engine oil  and remains flexible over the temperature range noted.     

        As a result, they  provide  excellent performance in high temperature   

        environments.  

–    The gaskets are made from aerospace mechanical grade silicone and

       will not break down and deform or crack up and leak like

       cork or neoprene .            

–     In addition, the gaskets will withstand operating temperatures

       from -100 to 500 degrees Fahrenheit.  

–     Best of all, it is a reusable gasket.

Fits Models:     All Ford V-4 and Saab V-4 engines.

Part #:              RG-8811077FR

Interchange part #’s: Victor Reinz 71-12799-00;  Ford 0599608;

Saab 88 11077; E1032029

Old Part #:  FVC-4FR

Set of 2 “ULTIMATE” silicone gaskets.

ULTIMATE silicone gaskets are 1/8″ thick.

Reusable gasket.

We also make this gasket in plain silicone – Part # RG-8811077

INSTALLATION INSTRUCTIONS:

• Wash the cover and cylinder head surfaces with solvent.  
•  Remove all traces of oil.
• The gasket must be installed  DRY – do not use oil or lube of any type
• TORQUE to 45-50 INCH pounds

DO NOT OVERTIGHTEN.   

If the gasket starts to bulge or squeeze out, then back off on the torque.

TO RE-USE GASKETS:  

Wash gaskets in hot soapy water.

Rinse and dry thoroughly.   

Re-install using the above installation  instructions.

Proudly made in the USA.