Stator or Magneto Cover Gasket – Suzuki GS750, GS850, GS1000, GS1100

Stator Cover Gasket  –  SILICONE 

also called a Magneto Cover Gasket

fits

SUZUKI –  GS750, GS850, GS1000, GS1100

–   Our silicone rubber gaskets are made from aerospace mechanical grade

     AMS silicone and designed to withstand temperatures up

      to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up

      like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces,

     and eliminate corrosion.

–   Gaskets are 100% reusable.

FITS:   Suzuki

GS750    

1977 – 1978:     B, C, EC, EN, N

1979:                 B, C, EC, EN, L, N

GS850    

1979:            G

1980:            G, GL

1981:            G, GL

1982:            G, GL

1983:            G, GL

GS1000  

1978:            C, EC, EN, N

1979:             C, EC, EN, L, N, S

1980:            E, G, GL, S

1981:            G, GL

GS1100  

1982:           G, GK, GL

1983:           G, GK, GL

1984:           GKE

Part #:  RG-11483-45000    

Suzuki part #:  11483-45000-H17

OEM# 11483-45000

ONE GASKET  –  Silicone –   1/16″ Thick

Reusable.

INSTALLATION INSTRUCTIONS:  

• Wash the cover and cylinder with solvent. 
• Remove all traces of oil.
  

        The surfaces must be  DRY  (NO OIL OR LUBE OF ANY TYPE).

• Install gasket DRY.

TORQUE SPECIFICATIONS:   

• Torque to 15 inch pounds. 

DO NOT OVER TIGHTEN.  

If the gasket starts to bulge or “pooch” out when tightening 

than you have overtightened.  If that happens then back off

on the torque.                                                                                                                                                                   

Loctite can be used on the bolts.

Proudly made in the USA.