Valve Cover Gasket – Jeep 4.2L

$36.50

SKU:RG-17447.05

VALVE COVER GASKET  –  Silicone

for

JEEP  4.2L

 

  • Our silicone rubber gaskets are made from aerospace mechanical

                         grade AMS  silicone and designed to withstand temperatures up to

                          400 degrees Fahrenheit.

  

  • Therefore, they will not break down and deform or crack up like

                          cork or neoprene. 

 

  • Our gaskets seal uneven and warped surfaces and 

                          eliminate corrosion.      

 

  • Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits models:         Jeep 4.2L 

1981-1983 CJ5 

1981-1986 CJ7

1981-1986 CJ8

1981-1987 SJ

 

Part #:        RG-17447.05

Corresponding part #: 8053050C

One gasket

Gasket has seven bolt holes

Gasket is 3/16″ thick silicone.

Reusable.

 

INSTALLATION INSTRUCTIONS:  

Wash the cover and cylinder head surfaces with solvent.    

Remove all traces of oil. 

The gaskets must be installed DRY   (NO OIL OR LUBE OF ANY TYPE).

TORQUE to 18 – 20 INCH POUNDS  

**Do not over tighten**    

It causes the gasket to squeeze out or bulge out. 

 

Silicone gaskets should not bulge or “pooch out”.   

If this happens, then back off on the torque.

 

TO REUSE GASKET:   

Wash gasket briefly in hot water and soap.  

Rinse gasket off and dry thoroughly.

Re-install using the above installation instructions.

   

 DO NOT SOAK GASKET IN SOLVENT OR GASOLINE.

 

PROUDLY MADE IN THE USA. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194