OIL PAN GASKET – SILICONE

for

FRANKLIN ENGINES –  6A4-145 to 6V-350

(see detailed engine list below)

 

• Our silicone rubber gaskets are made from aerospace mechanical

        grade AMS  silicone and designed to withstand temperatures up to

        400 degrees Fahrenheit.   

• Therefore, they will not break down and deform or crack up like

         cork or neoprene.   

• Our gaskets seal uneven and warped surfaces and 

         eliminate corrosion.

• Gaskets are 100% reusable.

         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

FAA-PMA Approved for the following engines

 

Fits:      Franklin Engines

                               6A4-145-A3; 

                     6A4-150-B3; 

                     6A4-165-B3, 

                     6A-335-B, -B1 

                     6V4-178-B33;   

                     6V4-200-C32, -C33

                     6A-350-C1, -C2

                     6V335-A, -B

                     6VS-335-A, -B, -A1A, -A1B

 

Part #:              RG-10366

1 each.

Gasket is 1/16″ thick silicone.

Reusable.

INSTALLATION AND MAINTENANCE 

1.       All surfaces must be clean and dry,

          No lubrication of any type.   

          This includes the threaded holes in the case.

2.       INSTALL GASKET – DRY

          TORQUE  TO  15   INCH POUNDS.  TORQUE gradually

           around and across cover to pull down evenly over 

           the entire cover.

          DO NOT OVER TIGHTEN 

           – over tightening makes the gasket bulge or squeeze out.

           If this happens then back off on the torque.

 

3.      Perform engine run and check for leaks.

4.      IF there is a leak, DO NOT CONTINUE TO TIGHTEN.

          This will only make the leak worse.

          – Remove the gasket and examine its condition.

          If it is still serviceable, wash it briefly

          in hot soapy water, rinse & dry off.

          RE-INSTALL using the above instructions.

5.      TO REUSE:  the gasket, clean as described in Step 4.

 

Installation Instructions:

Download Instructions

 

TO REUSE GASKET: 

1.    Wash gasket in hot soapy water.
2.    Rinse thoroughly and dry all surfaces. 
3.    Re-install using the above installation instructions.

 

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

USE CORK? GET REAL!   REAL Gaskets that is…

 

REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets

 for aircraft, automobile, and motorcycle engines.

 

Our silicone rubber gaskets are made from aerospace mechanical 

grade AMS silicone, designed to withstand temperatures 

up to 400 degrees Fahrenheit and to last the life of the engine.

 

Our gaskets seal uneven surfaces, eliminate corrosion and 

are 100% reusable.

 

We manufacture valve cover gaskets for:

Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and 

Wright radial  piston aircraft engines.

Automobiles: Ford, GM, Mopar, Porsche and VW automobile 

engines.

Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, 

Moto Guzzi, Norton, Triumph, Saab and most other motorcycle 

engines. 

 

If you are tired of oil leaks, then a silicone rubber gasket is the only 

way to go, and REAL Gaskets Tennessee is the only place 

you can get “The Original” silicone rubber gasket.

 

Proudly made in the USA.