VALVE COVER GASKET  – SILICONE 

for

KINNER   B-5, B-56

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures up to

     400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up like

      cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminate corrosion.

–    Gaskets are 100% reusable.

FITS:         KINNER B-5, B-56 ENGINE

                     Variants: R-5, R-53, R-55, R-56

PART #:      RG-942

OEM #:    942

4  BOLT HOLE GASKET

Gasket is 1/16″ thick silicone

Gasket is sold individually 

Price is per gasket.

Reusable.

INSTALLATION INSTRUCTIONS:

1.    Gasket surfaces must be clean and dry.   
2.    Remove all traces of oil.
3.    Install gasket DRY.       
4.    TORQUE: 15 TO 20 INCH POUNDS.       

CAUTION – DO NOT OVER-TIGHTEN!

If the gaskets starts to bulge or “pooch” out when tightening 

– you have over torqued.  

Back off on the torque if that happens.

TO REUSE GASKET: 

1.    Wash gasket briefly in hot soapy water.
2.    Rinse well and dry thoroughly.   
3.    Re-install gasket using the above installation instructions.

PROUDLY MADE IN USA.