Valve Cover Gasket – Pratt & Whitney R-985 Series, Wasp Jr (Set of 18)

$90.00

SKU:RG-90560-18

VALVE COVER GASKETS – SILICONE

for

PRATT & WHITNEY  R-985 Series

 

   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures up to

     400 degrees Fahrenheit.   

   Therefore, they will not break down and deform or crack up like

     cork or neoprene.   

   Our gaskets seal uneven and warped surfaces and 

     eliminate corrosion.   

   Gaskets are 100% reusable.

 

FITS:     

  PRATT & WHITNEY 

  R-985 SERIES WASP JR  

 (4 HOLE GASKET)

                 FAA-PMA approved

 

PART #:   RG-90560-18

This is a complete set is 18 gaskets.

Gaskets are 1/16″ thick silicone

Reusable.

 

These gaskets are also sold individually.  See part # RG-90560

 

INSTALLATION INSTRUCTIONS:

Clean valve covers with solvent and remove all traces of oil.

Gasket surfaces must be clean and DRY.

Install gaskets DRY.       

TORQUE: 10 TO 14 INCH POUNDS.      

CAUTION – DO NOT OVER-TIGHTEN!

Over tightening makes the gaskets bulge out or squeeze out.  

If that happens then back off on the torque.

Instructions are included in the package of gaskets.

 

TO REUSE GASKETS: 

Wash gaskets briefly on hot soapy water. 

Rinse thoroughly and then dry all surfaces. 

Re-install gaskets following the above installation instructions.

 

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194