Valve Cover Gasket Set   –  Silicone

for

Pratt & Whitney R-2800-CB Series;

(Set of 36 gaskets)

–   Our silicone rubber gaskets are made from aerospace mechanical

      grade AMS  silicone and designed to withstand temperatures up to

      400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up like

       cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

       eliminate corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits:         Pratt & Whitney R-2800-CB Series

Part #:       RG-139203-36     

                       FAA-PMA approved

OEM #:  139206

Package of 36 silicone gaskets

Gaskets are 1/16″ thick

Reusable.

These gaskets are also available to purchase individually.

See Part # RG-139203

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder head surfaces with solvent.   
2.    Remove all traces of oil.
3.    Silicone gaskets are installed DRY (No oil or lube used of any type).
4.    Valve covers and gasket surfaces must be clean and dry.  
5.    TORQUE: 10 TO 14 INCH POUNDS.      

CAUTION – DO NOT OVER-TIGHTEN!

When tightening – if the gaskets start to bulge or “pooch” out

then you are over tightening.    Back off on the torque.

TO REUSE GASKET:

1.    Wash gasket briefly in hot soapy water.
   
2.    Rinse thoroughly and dry all surfaces.
   
3.    Re-install using the above installation instructions.

PROUDLY MADE IN THE USA.