Valve Cover Gasket –  “ULTIMATE” Silicone

fits

ROTEC Aerosport R-2800 / R-3600

This may be the last gasket you will ever need to buy!

–     There is a layer of fiberglass centered between 2 layers of silicone that

        gives the material dimensional stability and higher tensile strength.

–     Therefore, this material is resistant to deterioration by weathering or

        engine oil and remains flexible over the temperature range noted.     

        As a result, they provide excellent performance in high temperature

        environments.  

–    The gaskets are made from aerospace mechanical grade silicone and

       will not break down and deform or crack up like cork or neoprene

       and leak.            

–     In addition, the gaskets will withstand operating temperatures

       from -100 to 500 degrees F.    

–     Best of all, it is a reusable gasket.

Fits:                 ROTEC Aerosport

Models:         R-2800 / R-3600

                 –  Seven and nine cylinder radial engines

PART#:   RG-ROTEC R-3600

Price is per gasket.

18 gaskets make a set.

ULTIMATE Silicone gaskets are 1/8″ thick.

Reusable.

These gaskets are also available in a set of 18 gaskets

See part #: RG-Rotec R-3600-S

INSTALLATION INSTRUCTIONS:

1.    Install DRY. 
2.    No sealant necessary
3.    Surfaces must be clean and dry.

TO RE-USE GASKET:

1.    Wash briefly in hot water and soap.  
2.    Rinse well.  
3.    Dry all surfaces thoroughly.
4.    Re-install gasket using the above installation instructions.

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~