VALVE COVER GASKETS  –  SILICONE

for

WRIGHT  R-1820, R-2600, R-3350

Set of 18 gaskets

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures up to

     400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up like

      cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminate corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FAA-PMA Approved for the following engines:

Fits:

WRIGHT   

R-1820-40, -60, -71, -87, -95, -97; 

R-2600-20, -22, -29A, -35

R-3350-23, -23A, -57, -59

Part #:      RG-117236-18

Set of 18 gaskets

Silicone gasket are 1/16″ thick – 4 Holes in gasket

Reusable

These gaskets are also available individually – 

they can be found under part # RG-117236.

INSTALLATION INSTRUCTIONS:

• Wash the cover and cylinder head surfaces with solvent.  
• Remove all traces of oil.
• The gasket must be installed  DRY – do not use oil or lube of any type
• TORQUE to 10-15 INCH pounds.

DO NOT OVER TIGHTEN

(It causes the gasket to squeeze or bulge out).

TO REUSE GASKET: 

Wash gasket in hot soapy water.

Rinse well and dry thoroughly.   

Re-install gaskets using the above installation instructions.

PROUDLY MADE IN USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~