Upper Oil Pan Gasket – Silicone
fits
Moto Guzzi
Upper oil pan gasket (actually sump spacer gasket) used on broad sump models.
– Our silicone rubber gaskets are made from aerospace mechanical
grade AMS silicone and designed to withstand temperatures
up to 400 degrees Fahrenheit.
– Therefore, they will not break down and deform or crack up
like cork or neoprene.
– Our gaskets seal uneven and warped surfaces,
and eliminate corrosion.
– Gaskets are 100% reusable.
Fits: Moto Guzzi Motorcycles
ALSO BRANDS: Aprilia, Derbi, Vespa, Gilera and Piaggio
Moto Guzzi:
1971 – 1981:
For single gasket upper oil pan WITH internal oil filter.
Griso, Breva 1100, Norge, Stelvio, 1200 Sport,
El Dorado, Ambassador, etc
1994 – 1999: 1100 Sport
1998 – 2005: VII, VII Sport, LeMans, Bellagio, Penny
2004 – 2007: MGS 01
Fits models: 1100 Sport, Cali 1100, Quota ALL; Cali EV; Cali Vintage; Cali Classic;
Cali Aquila Nera; Cali Aluminium;
Centauro; Daytona; V11 Sport; Bellagio; Breva 1100; Breva 1200;
Norge – ALL; Stelvio; Griso – ALL
Part number: RG-01003650
Corresponding part #’s: MG-3; OEM# 01003650
Direct replacement for upper pan gasket 01003651 used on all Griso, Breva 1100,
Norge, Stelvio, 1200 Sport.
Silicone Gasket is 1/16″ thick
Reusable.
INSTALLATION INSTRUCTIONS:
- Wash the cover and engine flange with solvent.
- Remove all traces of oil.
- The surfaces must be DRY (No oil or lube of any type).
Use lock washers or thread lock.
TORQUE (one time): 15 INCH POUNDS
DO NOT OVER TIGHTEN!
Over tightening causes the gasket to squeeze or bulge out.
Silicone gaskets should not bulge or “pooch out”.
If this happens, then back off on the torque.
It is okay to use Loctite on the bolts.
TO RE-USE GASKET:
- Wash gasket briefly in hot soapy water.
- Rinse well and dry thoroughly,
- Re-install gasket using the above installation instructions.
PROUDLY MADE IN THE USA.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~