Suzuki Rocker Cover Gasket – Silicone

fits

Suzuki Motorcycle –  GS750, GS1000, GS1100

Also called a Cylinder Head Cover Gasket

–   Our silicone rubber gaskets are made from aerospace mechanical 

     grade AMS silicone and designed to withstand temperatures 

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up 

     like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces,

    and eliminate corrosion.

–   Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FITS:      SUZUKI  –  GS750, GS1000, GS1100

• 1980-1981 Suzuki 750 E,L (16 bolt hole) 
• 1980-1984 Suzuki 16 valve GS750, 1100 E, L, LT
• 1980-1985 Katana 750, 1000, 1100

Part #:  RG-11173-49207

OEM# 11173-49201, 49202, 49203, 49204, 49205, 49206, 49207-H17

One silicone gasket – 1/16″ thick.

Reusable.

16-bolt hole gasket fits to 20-hole rocker cover. 

Pattern of this gasket is similar to Suzuki gasket  RG-11173-49224 but 

the outer bolt holes line up differently.

COUNT THE BOLT HOLES IN YOUR CURRENT GASKET and match to our picture:

 – IF YOU HAVE 16 BOLT HOLES  – ORDER PART # RG-11173-49207  

 – IF YOU HAVE 20 BOLT HOLES  – ORDER PART # RG-11173-49224

(Silicone valve cover gaskets for the above models are not 

to be used if the Suzuki motorcycle has a tach drive in 

the valve cover.   It could cause a clearance issue. FYI. )

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder head surfaces with solvent.  
2.    Remove all traces of oil.
3.    The gasket must be installed  DRY – do not use oil or lube of any type
4.    TORQUE SPECIFICATIONS:

           Torque to 15 inch pounds. 

            DO NOT OVER TIGHTEN!   

Over tightening causes the gasket to bulge out or squeeze out.

If the gasket starts to bulge or “pooch” out than back off on the torque.  

It is okay to use Loctite on the bolts.

TO REUSE GASKET:   

1.    Wash the gasket briefly in hot soapy water.  
2.    Rinse gasket well and dry thoroughly.   
3.    Re-install gasket using the above installation instructions.

PROUDLY MADE IN THE USA.