Breather Cover Gasket – Suzuki GS1000S, GS1100E, ES, S

Breather Cover Gasket – Silicone

for

Suzuki  GS1000S  &  GS1100S,ES,E

–   Our silicone rubber gaskets are made from aerospace mechanical 

     grade AMS silicone and designed to withstand temperatures 

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up 

     like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces,

     and eliminate corrosion.

–   Gaskets are 100% reusable.

FITS:    Suzuki

•     GS1000S     –  1982
•    GS1100E     –  1982 and 1983
•     GS1100ES   –  1982 and 1983
•     GS 1100S     –  1982 and 1983   

Part #:    RG-11177-49210

OEM#11177-49210, 49210-H-17

One silicone gasket – 1/8″ thick.

Reusable.

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder with solvent.
2.    Remove all traces of oil.
3.    The surfaces must be DRY (no oil or lube of any type).
   
4.    Install gasket DRY.   
5.   Torque to 20-25 inch pounds 

Do not over-tighten  

Over tightening causes the gasket to bulge or squeeze out.   

If that happens than back off on the torque.

To reuse gasket: 

1.    Wash gasket briefly in hot soapy water. 
2.    Rinse and dry all surfaces thoroughly.  
3.    After that, re-install gasket using the above installation instructions.

PROUDLY MADE IN THE USA.  

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~