Valve Cover Gaskets – Ural Motorcycle 650cc & 750cc – Black silicone gaskets

VALVE COVER GASKETS   OR

HEAD COVER GASKETS – black silicone

fits

URAL  Motorcycle – 650cc & 750cc 

            – up to 2018

–   Our silicone rubber gaskets are made from aerospace mechanical 

     grade AMS silicone and designed to withstand temperatures

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up

      like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces,

      and eliminate corrosion.

–   Gaskets are 100% reusable.

Fits:   URAL 650cc & 750cc engines

       YEARS  –  up to 2018

       All models and all variants

Part #:  RG-8.1037-01517-11B

Corresponding part #’s:   IMZ-8.1037-01517-11,  IMZ-8.1037-01517,

IMZ-8.1037-01517-01, IMZ-8.1037-01517-02,  IMZ-8.1037-01517-10

Set of 2 black silicone gaskets – gaskets are 3/32″ thick.

This is a three hole gasket.

Color:   Black.

We also offer this gasket in the orange silicone – Part #:  RG-8.1037-01517-11

Reusable gasket. 

INSTALLATION INSTRUCTIONS:

Wash the cover and cylinder with solvent.     

Remove all traces of oil.

The surfaces must be DRY  (NO OIL OR LUBE OF ANY TYPE).

TORQUE SPECIFICATIONS: **

6mm at both ends:    1.7 to 2.25 N’m,   23 to 28 kg-em,  15 to 20 in-lb

8mm Center Bolt:      2.1 to 2.6 N’m,   24 to 29 kg-em,  21 to 26 in-lb

DO NOT OVER TIGHTEN!  

** If the gasket starts to bulge or “pooch” out when tightening – 

then you are over tightening the gasket.  Back off on the torque.     

If the gasket splits or cracks then you have over torqued the 

silicone material and ruined the gasket. 

You must follow the recommended torque listed on the package.   

Tighter is not better.   It is okay to use Loctite on the bolts.

TO REUSE GASKET:

Wash gaskets briefly in hot soapy water.  

Rinse well and dry all surfaces thoroughly.

Reinstall gaskets using the above installation instructions.

PROUDLY MADE IN USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~