Automatic Transmission Pan Gasket – Silicone

fits

Buick, Chevrolet, Cadillac, GM, Pontiac

Turbo 400 and more

   –   Our silicone rubber gaskets are made from aerospace mechanical

        grade AMS  silicone and designed to withstand temperatures up to

        400 degrees Fahrenheit.   

   –    Therefore, they will not break down and deform or crack up like

         cork or neoprene.   

   –    Our gaskets seal uneven and warped surfaces and 

         eliminate corrosion.

   –    Gaskets are 100% reusable.

Fits Models:   Avanti, Bentley, Buick, Cadillac, Chevy, GMC,

Hummer, Jaguar, Jeep, Oldsmobile, Pontiac  and

Rolls Royce –  Turbo 400.

This is a TH375/400/3 L80 replacement silicone transmission oil pan gasket.

This is perfect replacement for those flimsy replacement gaskets that never

stay in place.

This gasket withstands temperatures of up to 400 degrees F and seals very well

under harsh conditions.

Part #:        RG-18621

Corresponding part #: FelPro TOS 18621; Mahle (A/T) W39341;

GM 8623266, 8626998, 8629807, 8655625; CTP-2

One silicone gasket – 1/8″ thick.

Gasket has 13 bolt holes.

Reusable gasket.

Installation instructions:

1.    Wash the cover and mounting surfaces with solvent.   
2.    Remove all traces of oil.
3.    The gasket must be installed DRY!   (No oil or lube used of any kind). 

           TORQUE TO 20-25 INCH POUNDS.   

           Do not over tighten!

           Silicone gaskets should not bulge or “pooch out”.  

           If they do it is because they have been over tightened.

TO RE-USE GASKET:

1.    Wash gasket briefly in hot soapy water.
   
2.    Rinse well and dry thoroughly.  
3.    Re-install gasket using above installation instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~