OIL PAN GASKET – SILICONE
FOR
CHRYSLER BIG BLOCK – V8
– Our silicone rubber gaskets are made from aerospace mechanical
grade AMS silicone and therefore designed to withstand
temperatures up to 400 degrees Fahrenheit.
– Therefore, they will not break down and deform or crack up
like cork or neoprene.
– Also, our gaskets seal uneven and warped surfaces, and
eliminates corrosion.
– In addition, the silicone gaskets are 100% reusable.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
FITS: CHRYSLER – DODGE PRODUCTS
– BIG BLOCK V8
ENGINES: 350, 360, 361, 383, 400, 413, 440, 466
YEARS: 1958-1980
Part #: RG-11729
Corresponding part #’S: FelPro OS 11729; 1834, MOP-1
One (1) silicone gasket – 1/8″ thick
Reusable gasket
INSTALLATION INSTRUCTIONS:
Wash the pan and mounting surfaces with solvent.
Remove all traces of oil.
The gasket must be installed DRY (NO OIL OR LUBE OF ANY TYPE).
TORQUE TO 20-25 INCH POUNDS
DO NOT OVER TIGHTEN.
Over tightening makes the gasket bulge out or squeeze out.
If that happens then back off on the torque.
TO REUSE GASKET:
Wash gasket briefly in hot soapy water.
Rinse well and then dry all surfaces thoroughly.
Re-install using the above installation instructions.
DO NOT SOAK IN SOLVENT OR GASOLINE.
Proudly Made in the USA.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
USE CORK? GET REAL! REAL Gaskets that is…
REAL Gaskets Tennessee is a manufacturer of silicone
rubber gaskets for aircraft, automobile, and motorcycle
engines.
Our silicone rubber gaskets are made from aerospace
mechanical grade AMS silicone, designed to withstand
temperatures up to 400 degrees Fahrenheit and to
last the life of the engine.
Finally, our gaskets seal uneven surfaces, and
eliminates corrosion.
And best of all, the gaskets are 100% reusable.
We manufacture valve cover gaskets for:
Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and
Wright radial piston aircraft engines.
Automobiles: Ford, GM, Mopar, Porsche and VW automobile
engines.
Motorcycles: BMW, Harley-Davidson, Suzuki, BSA, Ducati,
Moto Guzzi, Norton, Triumph, Saab and most other
motorcycle engines.
So, if you are tired of oil leaks, then a silicone rubber gasket is
the only way to go, and REAL Gaskets Tennessee is the
only place you can get “The Original” silicone rubber
gasket.
MADE IN THE USA.