Valve Cover Gaskets – FORD Big Block V8 – 330, 332, 352, 360, 361, 390, 406, 410, 427, 428 CID “ULTIMATE” Silicone

$50.00

SKU:RG-13049FR

Valve Cover Gaskets 

–  “ULTIMATE” Silicone

for

FORD BIG BLOCK V8

 

“ULTIMATE”  SILICONE IS

FIBERGLASS REINFORCED SILICONE 

 

This may be the last gasket you will ever need to buy!

 

–     There is a layer of fiberglass centered between 2 layers

        of silicone that gives the material dimensional stability

        and higher tensile strength.

           

–     Therefore, this material is resistant to deterioration by

        weathering or engine oil and remains flexible over the

        temperature range noted.     

        As a result, they  provide excellent performance in high

        temperature environments.  

 

–    The gaskets are made from aerospace mechanical grade

        silicone and will not break down and deform or crack

        up like cork or neoprene and leak.            

 

–     In addition, the gaskets will withstand operating

        temperatures from -100 to 500 degrees Fahrenhiet 

   

–    Best of all, it is a reusable gasket.   (see pictures)

 

FITS:       FORD BIG BLOCK  –  V8

                  1958-1978 

fits           330, 332, 352, 360, 361, 362, 389, 390, 

            406, 410, 427, & 428 CID

 

Part #    RG-13049FR

Corresponding part #:  FelPro VS13049 / Detroit 19330;  FVC-5FR

Set of two “ULTIMATE” silicone gaskets – gaskets are 1/8″ thick.

There are five (5) bolt holes in each gasket

Re-usable.

 

INSTALLATION INSTRUCTIONS:

  • Wash the cover and cylinder head surfaces with solvent.
  • Remove all traces of oil.
  • The gasket must be installed  DRY
  • do not use oil or lube of any type
  • TORQUE to 45-50  INCH pounds
  • Re-check torque, one time with engine hot.

DO NOT OVER TIGHTEN!

–  it causes the gasket to bulge or squeeze out.

Directions are printed on the package label.

 

TO RE-USE GASKET

Wash gasket in hot soapy water, rinse well,

and dry all surfaces thoroughly.

Re-install using the above installation instructions.

 

Proudly made in the USA.

 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194