Breather Cover Gasket – Suzuki 550

BREATHER COVER GASKET  –  SILICONE

for 

Suzuki Motorcycle GS 550

• Our silicone rubber gaskets are made from aerospace mechanical

                 grade AMS silicone and designed to withstand temperatures

                 up to 400 degrees Fahrenheit.   

• Therefore, they will not break down and deform or crack up

                 like cork or neoprene.   

• Our gaskets seal uneven and warped surfaces, and                                                                                                                                                                        eliminate corrosion.

• Gaskets are 100% reusable.

Suzuki

Fits:        550 Models:

1983: E, EF, ES, ES3, ESE, ESF, ESG, L;

1984: EF, ES3, ESE, ESF, ESG;

1985: EF, ES3, ESE, ESF, ESG, L;

1986: EF, ES3, ESE, ESF, ESG, L

Part #:     RG-11177-43403

OEM #11177-43403, 11177-43403-H17

One gasket

Gasket is 1/8″ thick silicone

Reusable

INSTALLATION INSTRUCTIONS:

Wash the cover and cylinder with solvent.    

Remove all traces of oil.

The surfaces must be DRY   (NO OIL OR LUBE OF ANY TYPE).

TORQUE SPECIFICATIONS:

Torque to 20-25 inch pounds. 

DO NOT OVER TIGHTEN!

If the gasket is over tightened it starts to bulge or “pooch” out.  

If that happens than back off on the torque.  

It is okay to use Loctite on the bolts.

TO REUSE GASKET:   

Wash gasket briefly in hot soapy water.   

Rinse well and dry thoroughly.    

After that, re-install gasket using the above

installation instructions.

Proudly made in the USA.