Clutch Cover or Crankcase Cover Gasket – SUZUKI GS850, GS1000, GS1100

CLUTCH COVER 

OR 

CRANKCASE COVER GASKET – SILICONE

for

Suzuki  GS850  GS1000  GS1100

• Our silicone rubber gaskets are made from aerospace mechanical 

                  grade AMS silicone and designed to withstand temperatures 

                  up to 400 degrees Fahrenheit.   

• Therefore, they will not break down and deform or crack up 

                  like cork or neoprene.   

• Our gaskets seal uneven and warped surfaces,

                  and eliminate corrosion.

• Gaskets are 100% reusable.

FITS:       SUZUKI

GS850    1980: GL

               1981: GL,GLX,GS

               1982: G,GL,GLZ,GS,GZ

               1983: G,GL,GD,GLD,GS

GS1000    1980: G,GL,GLT,GS,GT

                 1981: G,GL,GK,GK2,GKZ,GLZ,GS, GZ

                 1982: G,GL

                 1983: G,GL

GS1100    1982: G, GK, GK2, GKZ, GL, GLZ, GS, GZ 

                 1983: G,GK,GL,GD,GK,GKD,GLD,GS

                 1984: GK,GKE,GS,GZ,GKZ,GKD,SD,GE

Part #:     RG-11482-49100

Suzuki part #  11482-49100-H17

OEM# 11482-49100

One silicone gasket

Gasket is 1/16″ THICK. 

Reusable. 

INSTALLATION INSTRUCTIONS:       

1.    Wash the cover and cylinder with solvent.   
2.    Remove all traces of oil.
3.    The surfaces must be  DRY   (NO OIL or lube of any type).  
4.    Install gasket DRY.
5.    TORQUE SPECIFICATIONS:   Torque to 15 inch pounds.  

DO NOT OVER TIGHTEN!  

If the gasket starts to bulge or “pooch” out than you 

are over tightening and you should back off on the torque.

It is okay to use Loctite on the bolts.

TO REUSE GASKET:    

1.    Wash gasket BRIEFLY  in hot water and soap.   
2.    Rinse gasket and dry thoroughly.    
3.    Re-install gasket using the above installation instructions.

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~