Dipstick Tube Base Gasket – Lycoming O-235, O-290, O-320, O-360

$7.00

SKU:RG-72059

DIPSTICK TUBE BASE GASKET  –  Silicone

for

LYCOMING Engines 

O-235, O-290, O-320, O-360 and more

(See complete list below)

 

      Our silicone rubber gaskets are made from aerospace mechanical

        grade AMS silicone and designed to withstand temperatures up to

        400 degrees Fahrenheit.   

       Therefore, they will not break down and deform or crack up like

         cork or neoprene.   

       Our gaskets seal uneven and warped surfaces and 

         eliminate corrosion.

       Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FAA – PMA Approved for:

Lycoming  O-235, O-290, O-320, O-360

Also fits the following engines but at this time they are not FAA-PMA approved:

Lycoming   

IO-320; IO-360;

AEIO-360-B1B, -B1F, -B1H;

HIO-360;

O-480;

O-540;

IO-540-B,-E, -M;

TIO/LTIO-540-A

 

Part #:    RG-72059

Corresponding part #: 72059

Gasket is 1/8″ thick – takes a light torque

Reusable.

 

Installation Instructions:

Gasket surfaces must be clean and dry.     

CAUTION – DO NOT OVER-TIGHTEN!

 

TO REUSE GASKET:

Wash briefly in hot water and soap.  

Rinse well and dry thoroughly.   

Re-install. 

 

PROUDLY MADE IN THE USA. 

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

USE CORK?   GET REAL!   REAL Gaskets that is…

REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets 

for aircraft, automobile, and motorcycle engines.

Our silicone rubber gaskets are made from aerospace mechanical 

grade AMS silicone, designed to withstand temperatures 

up to 400 degrees Fahrenheit and to last the life of the engine.

Our gaskets seal uneven surfaceseliminate corrosion and 

are 100% reusable.

 

We manufacture valve cover gaskets for:

Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and 

Wright radial piston aircraft engines.

Automobiles: Ford, GM, Mopar, Porsche and VW automobile 

engines.

Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, 

Moto Guzzi, Norton, Triumph, Saab and most other 

motorcycle engines.

If you are tired of oil leaks, then a silicone rubber gasket

is the only way to go, and REAL Gaskets Tennessee is

the only place you can get “The Original” silicone 

rubber gasket.

 

MADE IN THE USA.

 

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194