Lifter Body Gasket – Continental W-670 Series

  LIFTER BODY GASKET  –  Silicone

                  fits

  CONTINENTAL W-670 SERIES

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures

      up to 400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up

      like cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminates corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits Models:     Continental W-670 Series

Part #:               RG-20268

                    FAA-PMA Approved

OEM #:           20268

1 each

Gasket is silicone and 1/16″ thick.

Complete set would take 14 gaskets.

Reusable gaskets.

INSTALLATION INSTRUCTIONS:

1.    Wash surfaces with solvent.  
2.    Remove all traces of oil.
3.    The gasket must be installed  DRY – do not use oil or lube of any type
4.    TORQUE:    15 – 20 INCH pounds.

DO NOT OVER TIGHTEN!

It causes the gasket to squeeze out.

TO REUSE GASKET: 

1.    Wash the gasket in hot soapy water.  
2.    Rinse gasket thoroughly and dry.   
3.    Re-install gasket using the above installation instructions.

Proudly made in the USA.