Oil Filter Cover Gasket – BMW MOTORCYCLE – R Series

OIL FILTER COVER GASKET – SILICONE

Also called: Timing Case Oil Filter Gasket or Oil Dipstick Filter Gasket

                      fits

BMW Motorcycle – R Series –  AIRHEAD

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS silicone and designed to withstand temperatures

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up

      like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces,

    and eliminate corrosion.

–   Gaskets are 100% reusable.

FITS:   BMW   

All BMW 2 valve R Series air cooled twins 1970 and on.

Models:   

R45, R50, R60, R65, R65LS, R75,

R80, R80RT, R80ST, R90, R90S,

R100, R100CS, R100RS, R100RT, R100S

Part number:    RG-11421338600

Corresponding part #:  OEM 11 42 1 338 600,  RG-6145

One gasket

Silicone gasket is 1/16″ thick. 

Reusable.

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder with solvent.  
2.    The surfaces must be DRY  (NO OIL or lube of any type).
3.    Install gasket DRY.     
4.    TORQUE: 15  INCH Pounds

Don’t over tighten.  

If the gasket starts to bulge or push out (sign of over tightening),

then back off on the torque.

TO RE-USE GASKET:

1.    Wash gasket briefly in hot soapy water.  
2.    Rinse and dry completely.  
3.    Re-install gasket using the above instructions.

PROUDLY MADE IN USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~