Oil Pan Gasket – Acura – “ULTIMATE” Silicone OEM#:  11251-PH7-000

OIL PAN GASKET – “ULTIMATE” SILICONE

fits

ACURA  LEGEND

Sedan, Coupe and NSX   (See years below)

• A layer of fiberglass is centered between 2 layers of silicone

                             and gives the material extra stability and ultimate strength.

                             This is the absolute most stress that a material can resist

                             while being pulled or stretched which makes this

                             one tough gasket. 

• The material is resistant to deterioration by weathering and

                             engine oil and remains flexible over the temperature range

                             and withstands temperatures up to 500 degrees F.

• The gaskets are made from aerospace mechanical grade silicone and

                             will not break down and deform or crack up like cork or neoprene.            

• It will withstand operating temperatures from -100 to 500 degrees F.  

• This is a reusable gasket.

This is a super heavy duty gasket.

As a result, this may be the last gasket you will ever need to buy!

Fits:      ACURA

1986 – 1990  Legend Sedan
1987 – 1990  Legend Coupe
1991 – 1995   NSX

Real Gaskets Part #:  RG-11251FR

OEM#:  11251-PH7-000

One silicone gasket

Gasket is 1/8″ thick silicone.

Re-usable gasket.

INSTALLATION INSTRUCTIONS: 

Wash the cover and mounting surfaces with solvent.

Remove all traces of oil.

The gaskets must be installed DRY   (NO OIL or lube of any type).

TORQUE:   45 – 50  INCH POUNDS  

DO NOT OVERTIGHTEN. 

Over tightening makes the gasket bulge or squeeze out. 

If that happens, back off on the torque.

TO REUSE GASKET:  

Wash gasket briefly in hot water and soap.

Rinse well and dry thoroughly. 

Re-install using the above installation instructions.

DO NOT SOAK IN SOLVENT OR GASOLINE.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~