Oil Pan Gasket – fits BMW Motorcycle “R” Series 1950 – 1970

OIL PAN GASKET – Silicone

               FOR

BMW Motorcycle  –   BMW TWINS 

   –   Our silicone rubber gaskets are made from aerospace mechanical

        grade AMS  silicone and designed to withstand temperatures up to

        400 degrees Fahrenheit.   

   –    Therefore, they will not break down and deform or crack up like

         cork or neoprene.   

   –    Our gaskets seal uneven and warped surfaces and 

         eliminate corrosion.

   –    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits:   1950 – 1970 BMW Airheads

Compatible with the following models:

• R50, R50/2, R50S
• R51/3
• R60, R60/2
• R67, R67/2, R67/3
• R68
• R69, R69S

Part #:   RG-11130007156

Corresponding part #’s:  11130007156; B-4

One silicone gasket.

Gasket is 1/8″ thick silicone.

Reusable.

INSTALLATION INSTRUCTIONS:

• Wash the cover and cylinder with solvent.
• Remove all traces of oil.
• The surfaces must be  DRY   (NO OIL OR LUBE OF ANY TYPE).

TORQUE SPECIFICATIONS:

20 to 25 INCH POUNDS   

–   DO NOT OVER TIGHTEN.

Over tightening makes the gasket pooch or bulge out.   

If that happens, then back off on the torque.

Loctite can be used on the bolts.

To Reuse Gasket:    

Wash the gasket in hot soapy water.

Rinse well and dry thoroughly.   

Re-install using the above installation instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~