Sub-Total: $0.00
Panhead Rocker Arm Cover Gasket – Harley Davidson – black silicone gaskets
$35.50
Panhead Rocker Arm Cover Gaskets – Harley Davidson
Made of Black Silicone
– REAL GASKETS TENNESSEE is a manufacturer of state of the art silicone
rubber gaskets, such as valve cover gaskets, oil pan gaskets and more.
– Firstly, the gaskets are made from aerospace / mechanical grade silicone
and therefore will not break down, dry up and deform or crack up
like cork or neoprene.
– Secondly, these gaskets are designed to withstand temperatures up
to 400 degrees Fahrenheit. As a result, they provide excellent
performance in high temperature environments.
– Lastly, REAL GASKETS seal uneven and warped surfaces,
and eliminates corrosion and are 100% reusable.
Fits:
Harley Pan Head Motorcycles
FL, FLH
1948 – 1965
Part #: RG-17541-48B
Corresponding part numbers: OEM 17541-48; HD-1-S/2
- Set of 2 BLACK silicone Rocker Cover gaskets – 1/8″ thick
- Eliminates spacer
- Reusable gaskets.
These gaskets are also made in reddish-orange silicone. (See RG-17541-48)
Installation instructions:
- Wash the cover and engine flange with solvent.
- Remove all traces of oil.
- The surfaces must be DRY.
- Do not use oil or lube of any type.
- TORQUE SPECIFICATIONS –
Use lock washers or thread lock and
torque (one time) 20 to 25 INCH POUNDS.
DO NOT OVERTIGHTEN!**
** If the gasket starts to bulge or “pooch” out when tightening
– then you are over tightening the gasket.
Back off on the torque.
If the gasket splits or cracks then you have over torqued
the silicone material and ruined the gasket.
You must follow the recommended torque listed on the package.
Tighter is not better.
It is okay to use Loctite on the bolts.
To re-use gasket:
- Wash gaskets in hot soapy water.
- Rinse well. Dry thoroughly.
- Re-install using the above installation instructions.
PROUDLY MADE IN THE USA.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~