Transmission Oil Pan Gasket – SILICONE
for
Chevrolet / GM Powerglide
fits
Chevrolet, Pontiac, Buick, Oldsmobile
1962 – 1973
– Our silicone rubber gaskets are made from aerospace mechanical
grade AMS silicone and designed to withstand temperatures up to
400 degrees Fahrenheit.
– Therefore, they will not break down and deform or crack up like
cork or neoprene.
– Our gaskets seal uneven and warped surfaces and
eliminate corrosion.
– Gaskets are 100% reusable.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fits: Powerglide Transmission Pan Gasket
Chevrolet, Pontiac, Buick, Oldsmobile
1962 – 1973
Part #: RG-2304
Corresponding #: CG-10, CTP-1; Moroso 93100; Mr Gasket 8693 / 61080MRG; JEGS 60980;
Mahle W32863; FelPro 2304 / TOS18608
One 14 bolt hole silicone gasket.
Silicone gasket is 1/8″ thick.
Reusable
INSTALLATION INSTRUCTIONS:
Wash the cover and cylinder head surfaces with solvent.
Remove all traces of oil.
The gaskets must be installed DRY
(No oil or lube of any type).
TORQUE TO 20-25 INCH POUNDS
DO NOT OVER TIGHTEN!
Over tightening causes the gasket to squeeze out or bulge out.
If that happens, back off on the torque a bit.
TO REUSE GASKET:
Wash gasket briefly in hot water and soap.
Rinse well and dry thoroughly.
Re-install gasket using the above installation instructions.
Proudly made in the USA.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~