PUSHROD TUBE GASKET  –  Silicone

for

CONTINENTAL W-670

Gasket for push rod housing to crankcase

–   Our silicone rubber gaskets are made from aerospace mechanical

      grade AMS  silicone and designed to withstand temperatures up to

      400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up like

      cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminate corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits Models:       Continental W-670 Series.

Part #:                  RG-24335

                  FAA-PMA Approved

OEM#: 24335

Price is per gasket.

Gasket is 1/16″ thick silicone.

A complete set takes 14 gaskets.

Reusable.

INSTALLATION INSTRUCTIONS:

 –  Wash surfaces with solvent.  

 –  Remove all traces of oil.

 –  The gasket must be installed  DRY – do not use oil or lube of any type

 –  TORQUE to 15 – 20 INCH pounds.

DO NOT OVER TIGHTEN.

It causes the gasket to squeeze or bulge out.

TO REUSE GASKET:

 –  Wash the gasket in hot soapy water.  

 –  Rinse well and dry thoroughly.   

 –  Re-install using the above installation instructions.

Proudly made in the USA.