PUSHROD TUBE NUT SEAL  –  Silicone

for

CONTINENTAL W-670 Series

–   Our silicone rubber gaskets are made from aerospace mechanical

      grade AMS  silicone and designed to withstand temperatures

      up to 400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up

      like cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminates corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits Models:    Continental W-670 Series

Part #:                        RG-20266

                     FAA-PMA Approved

1 each

Push rod tube nut seal – black silicone

Reusable.

This is also available in a set of 14 seals. See part # RG-20266-14

INSTALLATION INSTRUCTIONS:

1.    Place nut on tube, lubricate seal.
2.    Screw nut on to seal to bottom of nut.
3.    Push nut and seal up to threaded adaptor, then tighten.

TO REUSE SEALS: 

1.    Wash seals briefly in hot soapy water.
2.    Rinse well and dry thoroughly.   
3.    Re-install seals using the above installation instructions.

Proudly made in the USA.