Rocker Cover Gasket – Warner 145

ROCKER COVER GASKET – Silicone

for

WARNER 145 

–   Our silicone rubber gaskets are made from aerospace mechanical 

     grade AMS silicone and designed to withstand temperatures 

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up 

     like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces, and

     eliminates corrosion.

–   Gaskets are 100% reusable.

PART#:   RG-7601

OEM#:    7601

Gaskets sold individually

Gaskets are 1/16″ thick silicone

Reusable.

This gasket is also available in a set of 14 gaskets.  See part # RG-7601-14

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder head surfaces with solvent.   
2.    Remove all traces of oil.
3.    Silicone gaskets are installed DRY (No oil or lube used of any type).
4.   INSTALL DRY.    TORQUE: 15 TO 20 INCH POUNDS.     

CAUTION – DO NOT OVER-TIGHTEN!  

If you over tighten, it makes the gasket bulge out or squeeze out.

TO REUSE GASKET:

1.    Wash gasket briefly in hot water and soap. 
2.    Rinse the gasket off, dry thoroughly. 
3.    Re-install gasket using the above installation instructions.

PROUDLY MADE IN THE USA!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~