OIL PAN GASKET SET – SILICONE
Chrysler, Dodge, Plymouth – Slant 6
– Our silicone rubber gaskets are made from aerospace mechanical
grade AMS silicone and therefore designed to withstand
temperatures up to 400 degrees Fahrenheit.
– So, they will not break down and deform or crack up
like cork or neoprene.
– Also, our gaskets seal uneven and warped surfaces, and
– In addition, the silicone gaskets are 100% reusable.
Fits Models: Chrysler, Dodge, Plymouth and Truck – SLANT 6
ENGINES: 170, 198, 225
Part #: RG-12705
Corresponding part #’s: Fel Pro OS 12705 C-1; Mahle 1763-07931100;
Also: MOP-4; 2084412; 2240647; 4049287; F83014; OS5220; Z2122, Z2123
Four piece set
Silicone gaskets are 1/8″ thick
Wash the cover and mounting surfaces with solvent.
Then remove all traces of oil.
The gasket must be installed DRY – (NO OIL OR LUBE OF ANY TYPE).
TORQUE: 20 – 25 “INCH” POUNDS
Due to misreading this instruction as “foot” pounds,
Do not over tighten.
As a result of over tightening, the gasket starts to bulge or “pooch” out.
– So, back off on the torque.
Also, the installation instructions are printed on the label
that comes with the gasket.
TO REUSE GASKET:
Wash the gasket in hot soapy water.
Rinse well and dry thoroughly.
Then re-install using the above installation instructions.
DO NOT SOAK GASKETS IN SOLVENT OR GASOLINE.
PROUDLY MADE IN THE USA.