Thermostat Housing Gasket – Chrysler, Dodge, Plymouth – all V8 Engines
THERMOSTAT HOUSING GASKET – Silicone
MOPAR V8 Engines
– Our silicone rubber gaskets are made from aerospace mechanical
grade AMS silicone and designed to withstand temperatures
up to 400 degrees Fahrenheit.
– Therefore, they will not break down and deform or crack up
like cork or neoprene.
– Our gaskets seal uneven and warped surfaces,
and eliminate corrosion.
– Gaskets are 100% reusable.
FITS: CHRYSLER, DODGE, AND PLYMOUTH
– ALL V-8 ENGINES
Part #: RG-53063
OEM #: 53063
One silicone gasket
Gasket is 1/8″ thick silicone.
Wash the cover and cylinder head surfaces with solvent.
Remove all traces of oil.
Silicone gaskets are installed DRY (No oil or lube used of any type).
TORQUE TO 20-25 INCH POUNDS
**Do not over tighten**
It causes the gasket to squeeze or bulge out.
Silicone gaskets should not bulge or “pooch out”.
If this happens, then back off on the torque.
To re-use gasket:
Wash gasket in hot soapy water.
Rinse well and dry thoroughly.
Re-install using the above installation instructions.
Proudly made in the USA.