Transmission Oil Pan Gasket – Chrysler 727

TRANSMISSION OIL PAN GASKET – SILICONE

fits

CHRYSLER (MOPAR) 727  

 

–   Our silicone rubber gaskets are made from aerospace mechanical 

     grade AMS silicone and therefore designed to withstand

     temperatures up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up 

     like cork or neoprene.   

–   Also, our gaskets seal uneven and warped surfaces, and

     eliminates corrosion.

–   In addition, the silicone gaskets are 100% reusable.

 

FITS:

MOPAR:   

Chrysler –  Dodge  –  Plymouth 

Chrysler A727, A518, A618, 46RH,

               47RH, 47RE, 48RE, and TF8

Part #:           RG-A727

Corresponding part #’s: TG-10; MTP-1

One silicone gasket – 3/32″ thick

Reusable.

 

INSTALLATION INSTRUCTIONS:   

Wash the cover and mounting surfaces with solvent.   

Then remove all traces of oil.

The gasket must be installed DRY – (NO OIL OR LUBE OF ANY TYPE).

TORQUE:   18-23 “INCH” POUNDS

Due to misreading this instruction as “foot” pounds,

overtightening occurs.

Do not over tighten.   

As a result of over tightening, the gasket starts to bulge or “pooch” out. 

– So, back off on the torque just a little. 

Also, the installation instructions are printed on the label

that comes with the gasket.

 

TO REUSE GASKET:     

Wash the gasket in hot soapy water.

Rinse well and dry thoroughly.   

Then re-install using the above installation instructions.

 

DO NOT SOAK IN SOLVENT OR GASOLINE.

 

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

USE CORK?   GET REAL!    REAL Gaskets that is…

REAL Gaskets Tennessee is a manufacturer of silicone

rubber gaskets for aircraft, automobile, and motorcycle

engines.

 

Our silicone rubber gaskets are made from aerospace

mechanical grade AMS silicone, designed to withstand

temperatures up to 400 degrees Fahrenheit and to

last the life of the engine. 

 

Finally, our gaskets seal uneven surfaces, and

eliminates corrosion. 

 

And best of all, the gaskets are 100% reusable.

 

We manufacture valve cover gaskets for:

Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and 

Wright radial piston aircraft engines.

 

Automobiles: Ford, GM, Mopar, Porsche and VW automobile 

engines.

 

Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, 

Moto Guzzi, Norton, Triumph, Saab and most other 

motorcycle engines.

 

So,  if you are tired of oil leaks, then a silicone rubber gasket is 

the only way to go, and REAL Gaskets Tennessee is the 

only place you can get “The Original” silicone rubber

gasket.

 

MADE IN THE USA.