Transmission Oil Pan Gasket – Chrysler, Dodge, Plymouth Automatic 904 & 500

TRANSMISSION OIL PAN GASKET –  Silicone

for

CHRYSLER – DODGE – PLYMOUTH 

500 & 940 Automatic Transmission

   –   Our silicone rubber gaskets are made from aerospace mechanical

       grade AMS silicone and designed to withstand temperatures up

        to 400 degrees Fahrenheit.   

   –   Therefore, they will not break down and deform or crack up

        like cork or neoprene.   

   –   Our gaskets seal uneven and warped surfaces, and

        eliminate corrosion.

   –   Gaskets are 100% reusable.

Fits Models:

Chrysler – Dodge – Plymouth 

–            Automatic 940 transmission

             Years:  1960 – 2004  

–            Automatic 500 transmission

             Years 1988 – 2004  

Part #:         RG-4295875

Corresponding part #’s: RG-904, MTP-2;  FelPro TOS18667, 4295875

30122, 30180,429587AC,4617220, 749027-PO, M4295875, W38031

One silicone gasket – 3/32″ thick

14 bolt hole gasket

Reusable.

INSTALLATION INSTRUCTIONS: 

Wash the transmission Pan with solvent.   

Remove all traces of oil.

The gasket must be installed DRY   (NO OIL OR LUBE OF ANY TYPE).

TORQUE TO 15-20 INCH POUNDS

DO NOT OVER TIGHTEN THE GASKET  

–   As a result of overtightening, the gasket will  bulge out or

    squeeze out.    If that happens then back off on the torque.

TO REUSE GASKET: 

Wash gasket BRIEFLY in hot soapy water.  

Rinse well and dry thoroughly.

Re-install using the above installation instructions.

DO NOT soak gasket in solvent or gasoline.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~