VALVE COVER GASKET – SILICONE

for

KINNER B-54 Engine

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures up 

     to 400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up like

      cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminate corrosion.

–    Gaskets are 100% reusable.

FITS:       KINNER B-54 ENGINE

PART #:   RG-941     FAA/PMA approved

OEM #:    941

2 HOLE GASKET  –   1/16″ THICK  Silicone  

Gaskets sold individually.

Price is per gasket.

Reusable gasket.

INSTALLATION INSTRUCTIONS:

1.    Gasket surfaces must be clean and dry.    
2.    Remove all traces of oil.
3.    Install gasket DRY.   
4.    DO NOT USE OIL OR LUBE OF ANY KIND.
5.    TORQUE:      15 TO 20 INCH POUNDS.     

CAUTION – DO NOT OVER-TIGHTEN!

 If the gasket starts to bulge out or “pooch” out 

then you are over tightening!  

Back off on the torque at that point.

INSTRUCTIONS TO REUSE GASKET:     

1.    Wash gasket briefly in hot water and soap.  
2.    Rinse off  gasket thoroughly and dry all surfaces. 
3.    Re-install gasket using the above installation instructions.

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~