Valve Cover Gasket – Suzuki GS 1000

VALVE COVER GASKET – SILICONE

fits

Suzuki GS 1000

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS silicone and designed to withstand temperatures

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up

     like cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces,

     and eliminates corrosion.

–   Gaskets are 100% reusable.

Suzuki GS 1000

Fits Models:

1978: E, C, EC, EN, N

1979: E, S, C, EC, EN, L, N

1980: E, G, GL, S

1981: G, GL

Part #:        RG-11173-49004

OEM #11173-49002, 11173-49003, 11173-49004

1 gasket

16 Bolt Hole silicone gasket – 1/16″ thick

Reusable.

16-Bolt Hole Gasket – compare your original gasket to picture 

to be sure that you are ordering the correct gasket for your 

Suzuki.

Be sure to follow the torque instructions on the label.

INSTALLATION INSTRUCTIONS:   

1.    Wash the cover and cylinder with solvent.   
2.    Remove all traces of oil.
3.    The surfaces must be DRY.   (NO OIL OR LUBE OF ANY TYPE).
4.    Torque to 15 inch pounds  
5.    DO NOT OVER TIGHTEN.        

           Don’t let the gasket bulge or “pooch” out.  

           If that happens then back off on the torque.

           It is okay to use Loctite on the bolts.

TO REUSE GASKET:  

1.    Wash the gasket in hot soapy water.  
2.    Rinse and dry gasket thoroughly.   
3.    Re-install gasket using the above installation instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~