Valve Cover Gasket – Suzuki GS 550

$25.00

SKU:RG-11173-43402

VALVE COVER GASKET 

or

CYLINDER HEAD COVER GASKET

fits

Suzuki GS 550

 

 

   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures up to

     400 degrees Fahrenheit.   

   Therefore, they will not break down and deform or crack up like

     cork or neoprene.   

   Our gaskets seal uneven and warped surfaces and 

     eliminate corrosion.

   Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

Fits:       SUZUKI  GS 550

   1983 РGS550E, EF, ES, ES3,ESE, ESF, ESG, L

   1984 РGS550EF, ES3, ESE, ESF, ESG,

   1985 РGS550EF, ES3, ESE, ESF, ESG, L

   1986 РGS550EF, ES3, ESE, ESF, ESG, L

 

Part #:    RG-11173-43402

OEM# 11173-43402

Gasket is 1/16″ thick silicone

This is a 17 bolt hole gasket.

Reusable

 

Please follow the torque instructions listed on the label.   

Install gasket DRY.

 

INSTALLATION INSTRUCTIONS: 

  1.    Wash the cover and cylinder with solvent.   
  2.    Remove all traces of oil.
  3. ¬† ¬†All surfaces must be DRY. ¬†¬†(NO OIL OR LUBE¬†OF ANY TYPE)¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† If the¬† surfaces are not dry then the gasket will slide out – you don’t want that!
  4.    Install the gasket DRY.    
  5.    TORQUE SPECIFICATIONS:  

           Torque 15 to 20 inch pounds

           DO NOT OVER TIGHTEN.

If you see the gasket bulging or “pooching ” out¬†

than back off on the torque a bit.

 

TO REUSE GASKET:   

  1.    Wash gasket briefly in hot water and soap.  
  2.    Rinse gasket off and dry thoroughly.
  3.    Re-install using the above installation instructions.

 

Proudly made in the USA.

CONTACT US

Real Gaskets Tennessee
2120 West G Street
Elizabethton, TN 37643 U.S.A.

1 (800) 635-7325

1 (423) 543-6194

We will be closed from 09/22/2023 until 09/27/2023. All orders placed during that time will be shipped upon our return.