VALVE COVER GASKETS  –  Silicone

fits

WRIGHT  R-975-11   Whirlwind

Set of 18 gaskets

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up like

     cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces and 

     eliminate corrosion.

–   Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FITS:     WRIGHT

      975-11 WHIRLWIND

        FAA-PMA Approved.

PART #:   RG-2677-18

OEM#: 2677

4 BOLT HOLE GASKET  – 1/16″ thick silicone

Package of 18 gaskets

It takes 18 gaskets for a complete set.

Reusable gaskets.

These gaskets are sold individually under Part # RG-2677

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder head surfaces with solvent.   
2.    Remove all traces of oil.
3.    Silicone gaskets are installed DRY (No oil or lube used of any type).
4.    TORQUE:   15  INCH POUNDS.

CAUTION – DO NOT OVER-TIGHTEN!   

It causes the gasket to squeeze or bulge out. 

If this happens, then back off on the torque.

TO RE-USE GASKET: 

1.    Wash the gasket in hot soapy water.  
2.    Rinse well and dry thoroughly.   
3.    Re-install using the above instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~