VALVE COVER GASKET

fits

WRIGHT  “Cyclone”  R-1300, R-1820, R2600 Engines

–   Our silicone rubber gaskets are made from aerospace mechanical

      grade AMS  silicone and designed to withstand temperatures up to

      400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up like

       cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

       eliminates corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits:      WRIGHT – “Cyclone”

           R-1300;   

              R-1820-56, -66, -71, -72, -76, -80, -86

              R-2600

Part #:        RG-138861-18

Set of 18 gaskets

Silicone gasket  – 1/16″ thick     (6 Holes in gasket)

Reusable.

INSTALLATION INSTRUCTIONS:

Clean the valve cover and all surfaces of all residual material.

Remove all traces of oil.

Install gaskets DRY.  

TORQUE: 15 Inch Pounds    

This is a light torque.   

Do not over tighten.

Over tightening causes the gasket to bulge or squeeze out.

If that happens then back off on the torque.

TO RE-USE  GASKET:

Wash gaskets in hot soapy water.

Rinse well & dry thoroughly,

Re-install gaskets using the above installation instructions

PROUDLY MADE IN THE USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~