Valve Cover Gaskets – URAL Motorcycle 650cc & 750cc

VALVE COVER GASKETS or HEAD COVER GASKETS

for 

URAL Motorcycles  –  650cc & 750cc engines – up to 2018

–  Our silicone rubber gaskets are made from aerospace mechanical

    grade AMS  silicone and designed to withstand temperatures

    up to 400 degrees Fahrenheit.   

–  Therefore, they will not break down and deform or crack up like

    cork or neoprene.   

–  Our gaskets seal uneven and warped surfaces and 

    eliminate corrosion.

–  Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits:    URAL  –  650cc  &  750cc engines

        Years:    UP TO 2018

        All models and all variants

Part #:  RG-8.1037-01517-11

Corresponding part #’s:  IMZ-8.1037-01517,  IMZ-8.1037-01517-01,

IMZ-8.1037-01517-02, IMZ-8.1037-01517-10.  IMZ-8.1037-01517-11

Set of 2 silicone gaskets  – 3/32″ Thick

This is a three hole gasket.

We also offer this gasket in black silicone – part #:   RG-8.1037-01517-11B

Reusable gasket.

INSTALLATION INSTRUCTIONS:

Wash the cover and cylinder with solvent.     

Remove all traces of oil.

The surfaces must be DRY  (NO OIL OR LUBE OF ANY TYPE).

TORQUE SPECIFICATIONS: **

6mm at both ends:    1.7 to 2.25 N’m,   23 to 28 kg-em,  15 to 20 in-lb

8mm Center Bolt:      2.1 to 2.6 N’m,   24 to 29 kg-em,  21 to 26 in-lb

DO NOT OVER TIGHTEN!  **

** If the gasket starts to bulge or “pooch” out when tightening – 

then you are over tightening the gasket.  Back off on the torque.     

If the gasket splits or cracks then you have over torqued the 

silicone material and ruined the gasket. 

You must follow the recommended torque listed on the package.   

Tighter is not better.   It is okay to use Loctite on the bolts.**

TO REUSE GASKET:

Wash gaskets briefly in hot soapy water.  

Rinse well and dry all surfaces thoroughly.

Reinstall gaskets using the above installation instructions.

Proudly made in the USA.