Valve Cover Gaskets Set – Silicone
for
Lycoming R-680 Series; Set of 18
– Our silicone rubber gaskets are made from aerospace mechanical
grade AMS silicone and designed to withstand temperatures up
to 400 degrees Fahrenheit.
– Therefore, they will not break down and deform or crack up like
cork or neoprene.
– Our gaskets seal uneven and warped surfaces and
eliminate corrosion.
– Gaskets are 100% reusable.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fits: Lycoming R-680 Series.
FAA-PMA Approved.
Part #: RG-1843-18
OEM#: 1843
Package of 18 gaskets
Silicone gasket – 1/16″ thick.
Reusable.
These gaskets are available to purchase individually- see part RG-1843
INSTALLATION INSTRUCTIONS:
FOLLOW INSTRUCTIONS ON THE LABEL.
- Wash all surfaces with solvent.
- Remove all traces of oil.
- The gasket must be installed DRY (No oil or lube of any type).
- TORQUE TO 8 to 12 INCH POUNDS.
CAUTION – DO NOT OVER-TIGHTEN!
Over tightening causes the gasket to bulge out or squeeze out.
If that happens, then back off on the torque.
TO REUSE GASKETS:
- Wash gaskets briefly in hot soapy water.
- Rinse well and dry all surfaces.
- Re-install gaskets using the above installation instructions.
Proudly made in the USA.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~