VALVE COVER GASKETS  –  Silicone

fits

Wright R-975-11 Whirlwind

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures

     up to 400 degrees Fahrenheit.   

–   Therefore, they will not break down and deform or crack up like

     cork or neoprene.   

–   Our gaskets seal uneven and warped surfaces and 

     eliminate corrosion.

–   Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

FITS:  WRIGHT 975-11 WHIRLWIND

             FAA-PMA Approved.

PART #:   RG-2677

OEM#: 2677

4 BOLT HOLE GASKET  – 1/16″ thick silicone

Price is per gasket

Reusable gasket.

This gasket is available in a set of 18.   See part # RG-2677-18

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder head surfaces with solvent.   
2.    Remove all traces of oil.
3.    Silicone gaskets are installed DRY (No oil or lube used of any type).
4.    TORQUE:   15  INCH POUNDS.

 CAUTION – DO NOT OVER-TIGHTEN!   

Over tightening causes the gasket to squeeze or bulge out. 

If this happens, then back off on the torque.

TO RE-USE GASKET:  

1.    Wash the gasket in hot soapy water.  
2.    Rinse well and dry thoroughly.   
3.    Re-install gasket using the above instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~