VALVE COVER GASKET  – Silicone

              fits

CHEVROLET STRAIGHT 6

   –   Our silicone rubber gaskets are made from aerospace mechanical 

        grade AMS silicone and designed to withstand temperatures 

        up to 400 degrees Fahrenheit.   

   –   Therefore, they will not break down and deform or crack up 

        like cork or neoprene.   

   –   Our gaskets seal uneven and warped surfaces,

       and eliminate corrosion.

   –   Gaskets are 100% reusable.

Fits:            Chevrolet Straight 6-Cylinder

Models:     1937 to 1962  –    216, 235 CID 

                   1957 to 1962   –   261 CID

Part #:     RG-50190

Corresponding part #’S:  VS50190C;   CVC-3

1 Silicone gasket  –  1/8″ thick silicone  

Gasket has 4 bolt holes.

Reusable.

The valve cover gasket  is also available in:

“ULTIMATE”  fiberglass reinforced silicone, Part #:  RG-50190FR

INSTALLATION INSTRUCTIONS:

1.    Wash the cover and cylinder head surfaces with solvent.   
2.    Remove all traces of oil.
3.    The gasket must be installed DRY  (No oil or lube of any type).

                    TORQUE TO 20-25 INCH POUNDS.

                     DO NOT OVER TIGHTEN!

                     Over tightening causes the gasket to bulge or squeeze out.

TO REUSE GASKET:  

1.    Wash gasket briefly in hot water and soap.
   
2.    Rinse gasket well, dry thoroughly.
3.    Re-install gasket using the above installation instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~