Valve Cover Gasket Set – Silicone

for

Pratt & Whitney R-1830, R-2800, R-1340

Set of 18

–   Our silicone rubber gaskets are made from aerospace mechanical

     grade AMS  silicone and designed to withstand temperatures up to

     400 degrees Fahrenheit.   

–    Therefore, they will not break down and deform or crack up like

      cork or neoprene.   

–    Our gaskets seal uneven and warped surfaces and 

      eliminate corrosion.

–    Gaskets are 100% reusable.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fits:     Pratt & Whitney

               R-1340 -S1H1, -S1H1-G, S3H1, S1H2  Wasp;

             R-1830 Twin Wasp, 

             R-2800 Double Wasp (3 holes in gasket).

PART #:   RG-88962-18

OEM:  88962

Three (3) hole silicone gasket

Gaskets are 1/16″ thick silicone

Reusable

These gaskets are available  to purchase individually under part #:  RG-88962

INSTALLATION INSTRUCTIONS:

1.    Clean valve covers with solvent and remove all traces of oil.
2.    Gasket surfaces must be clean and DRY.
3.    Install gaskets DRY.       
4.    TORQUE: 10 TO 14 INCH POUNDS.      

CAUTION – DO NOT OVER-TIGHTEN!

Over tightening makes the gaskets bulge out or squeeze out.  

If that happens then back off on the torque.

Instructions are included in the package of gaskets.

TO REUSE GASKETS: 

1.    Wash gaskets briefly on hot soapy water. 
2.    Rinse gaskets thoroughly and then dry all surfaces. 
3.    Re-install gaskets following the above installation instructions.

Proudly made in the USA.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~